| 01 |
Centering sleeve | | | 1 | | |
| 02 |
Universal joint LK = bolt hole | LK=78MM/D=110MM | | 1 | | |
| 03 |
Self-locking hex nut | M10 | | 6 | | |
| 04 |
Hex Bolt | M10X50/8.8 | | 6 | | |
| 04 |
Hex Bolt ZNS3 chrome-free CR(VI) | M10X50-10.9 | | 6 | | |
| 05 |
Hex Bolt | M12X1,5X25 | | 1 | | |
| 06 |
Washer | D=36MM/ZNS | till 1991 | 1 | | |
| 06 |
Washer ZNS3 chrome-free CR(VI) | D=36MM/ZNS3 | | 1 | | |
| 07 |
Dust protection | | | 1 | | |
| 08 |
Centre Mount | 55X13X30 | till 1987 | 1 | | |
| 08 |
Centre Mount | 55X13X30 | from 1987 | 1 | | |
| 09 |
Grooved ball bearing | D=55/D=30 | | 1 | | |
| 10 |
Hex Bolt with washer | M8X22-SB-Z4 | | 2 | | |
| 11 |
Dustcover plate | D=30X58X5,5-CRH | | 1 | | |
| 12 |
Hose clamp | L=115MM | | 1 | | |
| 13 |
Rubber boot | | | 2 | | |
| 14 |
Washer-gasket | VL-93 | | 1 | | |
| 15 |
Const.-veloc. joint wthout knurled bush LK = bolt hole | LK=80MM (Z=24) | | 1 | | |
| -- |
Spacer | | | 1 | | |
| 16 |
Snap ring | 22,5X1,2 | | 1 | | |
| 17 |
Drive flange | | | 1 | | |
| 18 |
Stud bolt | M10X30 | | 4 | | |
| 19 |
Fillister head screw | M8X50 | | 6 | | |
| 20 |
Reinforcement | D=9MM/PHR | | 3 | | |
| 24 |
Repair kit swivcl joint | | | 1 | | |