| 01 |
Intake manifold with flap control | | | 1 | | |
| 02 |
Profile-gasket | | | 4 | | |
| 03 |
Adjuster unit | | till 2013 | 1 | | |
| 03 |
Adjuster unit | | | 1 | | |
| 04 |
Receptacle housing | 5 POL. CODE A | | 1 | | |
| -- |
Bushing contact MLK 1.2 ELA | 0,75-1,0 MM² AG | | 5 | | |
| -- |
Strand seal ELA3,6 | | | 5 | | |
| -- |
Jack MLK 1.2 | 0,35 MM²/AG | | 5 | | |
| -- |
Protection cap | | | 5 | | |
| 05 |
Plastic bolt | 6,0X18 | | 3 | | |
| 06 |
Pipe | | | 1 | | |
| 07 |
O-ring | 25X3,7 | | 1 | | |
| 08 |
O-ring | | | 1 | | |
| 09 |
Fastening elements | M6X76 | | 4 | | |
| 10 |
Fastening elements | M6X116,4 | | 1 | | |
| 11 |
Holder | | | 1 | | |
| 12 |
Cable clamp | | | 1 | | |
| 13 |
Holder | | | 1 | | |
| 14 |
Tubing support | D10-11 | | 1 | | |
| 15 |
Cable clamp | | | 1 | | |
| 16 |
Fillister head screw | | | 6 | | |
| 17 |
Throttle | | | 1 | | |
| 18 |
Receptacle housing | 4-POLIG | | 1 | | |
| -- |
Jack SLK 2.8 ELA | 1,0-2,5MM² /SN | | 4 | | |
| -- |
Strand seal | 0,75-1,0MM² | | 4 | | |
| 19 |
Profile-gasket | | | 1 | | |
| 20 |
Torx-bolt with washer chrome-free CR(VI) | M6X20-U1-8.8 | | 3 | | |
| 21 |
Sensor, boost pressure | | | 1 | | |
| 22 |
Socket housing | 3-POL. | | 1 | | |
| -- |
Bushing contact MLK 1.2 ELA | 0,35-0,5MM² AG | | 3 | | |
| 23 |
Hex Bolt with washer chrome-free CR(VI) | M6X20 | | 1 | | |
| 24 |
Rubber mounting | | | 1 | | |